1.De-maging Fluoride Compound
We supply the secondary aluminum industry with an excellent cost effective
substitute for fluoride compounds used as flux. The compound has been
substituted for aluminum Fluoride (AlF3),
natural Cryolite and Fluorspar (CaF2).
The compound can be viewed as a mixture of 1.25 parts of Cryolite and
1 part Aluminum Fluoride and it provides the benefits of both in aluminum
cell bath chemistry. Our compound provides faster and higher aluminum
recoveries, while effectively de-maging aluminum scrap. The recovery
is at least 15% higher comparing with traditional de-maging materials.
The elemental impurities in compound, such as calcium and phosphorus
are present in much lower concentrations than in natural or reclaimed
Cryolite and that the quality is very consistent. For example, the typical
level of calcium is approximately 0.006 wt%. Phosphorus, as P205, is below our detection limit, which is 0.002 wt%. The compound is supplied
in granular form with particle size and particle size uniformity adjusted
to minimize dust and the minimize segregation in salt-flux mixtures.
The melting point is 675-720°C and material is stable and non hygroscopic.
We supply the compound in 50 lb bags or in
one metric ton big bags.
Copyright © Accomet Corporation. All rights reserved. 1991-2015